Bridge Gaps
HeadlineHeadlineHeadlineHeadlineHeadline
1302520686.jpg
Search:
Annoyed by scratches on your wood flooring?
Posted on: 10-17-2016 by Floor Covering Media

 

Are you bothered by unsightly scratches you see on your wood flooring but somewhat reluctant or financially unable to pay for costly refinishing projects?

 

 

According to The New York Times, there are a few affordable ways to restore worn wood flooring that is dull, scuffed, scratched or significantly damaged. The methods suggested below do not require sanding, restaining or resealing.
 

 

If the color is remarkably well preserved, but the finish is visibly scratched, screening and recoating the surface of the damaged wood flooring is a relatively inexpensive method of restoration that involves lightly abrading the top coat with polyurethane and then applying a new coat of floor finish.

 

 

This works best when the finish has been damaged, but the wood hasn’t. “It’s a fast way to revive a floor that is in decent condition,” according to Oliver Keeley, the owner of Woodlawn Floor Supplies in the Bronx. Screening and recoating a 700-square-foot living room floor, he said, typically takes a day and starts at about $1,000. But refinishing a floor of the same size could cost double that amount and take two or three days, for the same size area.

Screening will not work on waxed floors however. Hire a handyman to rewax and polish the floors using a buffing machine with a steel wool pad, which will cost about $300 or $400. A floor refinisher should be able to determine your floor’s finish. Cleaning a spot. Apply paint thinner or mineral spirits to a white rag and wipe the floor. If the rag turns yellow or brown, the finish is likely wax.

Those with flooring that is too damaged for waxing or screening and recoats could actually consider painting the flooring. “It’s a relatively quick and inexpensive way to completely change the room,” according to William McLure, an artist and interior designer, who used paint to transform the living room and kitchen of his one-bedroom rental in a 1920s house in Birmingham, Ala. When Mr. McLure moved in a few years ago, he removed the wall-to-wall carpet and found pine floors, which had tinted into an unbecoming shade of orange. Without consulting his landlord, he decided to paint them in white.

“I like to ask for forgiveness after the fact,” said Mr. McLure, who cut up the carpet into short rolls that he sneaked out to the garbage at 2 a.m., to avoid questions from neighbors. (His landlord, he said, still hasn’t noticed.) After painting the living room floors with Decorator’s White from Benjamin Moore, he used painter’s tape to create a turquoise border around the perimeter. In the kitchen, to give the dated linoleum floors a new look, he skimmed the surface with a pole sander to ensure the paint would stick, then primed the floor and used a yardstick and painter’s tape to create thick blue-and-white stripes. Since then, he has redone the living room floor in alternating stripes of gray, black and white.

 

 

First-time flooring painters are advised to avoid attempting anything elaborate. When converting her den into a playroom last year, Emily Cisz, a 32-year-old stay-at-home mother in Hilton, N.Y., decided to whitewash the dated parquet floors. Although she rented an orbital sander from Home Depot (for about $40) to remove the existing finish, the result still “turned out yellowish,” said Ms. Cisz, who chronicled the project on Elizabeth Joan Designs, a blog she started with her sister, Erin Cole, using their two middle names.

To fix the problem, Ms. Cisz sanded the floor again and, after wiping away the dust, applied a coat of primer followed by two coats of gray paint mixed from leftovers she had. Then she topped that with three coats of Minwax water-based polyurethane, to give it a durable finish. A year later, she said, the floor is “holding up great.”

Just remember that in order for the paint to stick, most floors will require some level of roughing up to remove any wax or sealant. And while solid hardwood floors can generally be sanded and refinished repeatedly, engineered floors (made of plywood layers with a hardwood top) can be sanded down only so many times. So consider the thickness of the wood before scuffing it up.

 

 

“I had a client several years ago who wanted to stain and finish his existing parquet flooring in order to save on the cost of installing new flooring,” said Logan Yost, an interior designer and consultant for Mirador Real Estate in Manhattan. “Against both my advice and the advice of the contractor, he refinished the floors. We hadn’t even finished our furniture deliveries when the floors started splintering and falling apart.” For that reason, he said, “I recommend either replacing parquet floors with a good quality hardwood or leaving them as is and doing what you can to make them work.”

Those with flooring too thin to sand might consider decorating in a way that diverts attention away from an unsightly floor. Painting your walls a dark neutral, rather than a light color, can help tame those honey-colored parquet floors often found in 1960s and 1970s New York apartment buildings, Mr. Yost said. And large area rugs are not only a cost-effective way to hide your floors, he added, they can also help “soften and define a space.”

 

 

Alyssa Kapito, who founded the Manhattan interior design firm Kapito Muller with Vivian Muller, suggested using sisal: The tone of the material blends well with the color of most parquet floors, and it’s easy to layer a decorative rug on top. Then “throw in some accents to your scheme with a strong visual pop, like white lacquer furniture or shiny brass hardware,” she said, pointing out options like the curvilinear midcentury table lamp from West Elm ($119) or the odyssey white dining table from CB2 ($199). That will not only “grab your eye’s attention away from your floors,” she said, but it will also “make your space feel a little more contemporary.”
 

 

Those with unbearably unattractive flooring could actually consider installing a floating floor. “As long as the floor is level and down solid, you could just float another engineered wood floor over it,” said Rick Holden, the chief operating officer at Derr Flooring, a wood-floor distributor based in Willow Grove, Pa., and a former chairman of the National Wood Flooring Association.

Unlike traditional solid-wood strips, a floating floor isn’t nailed down. Instead, a foam layer goes down over the existing floor and the planks are snapped together on top. The average cost, including labor and materials, ranges from $5 a square foot for a laminate floor to $10 a square foot for engineered planks, said Mr. Keeley at Woodlawn Floor Supplies. But “you need a pretty level existing floor,” he said, “so you don’t get hollow spots and movement.”

And when it comes to maintenance, Mr. Keeley added, don’t overdo it. “Mopping every week is totally unnecessary,” he said, noting that most people oversaturate their floors, which can damage the finish. “If people vacuum and dust-mop their floors on a regular basis, the floors will last for numerous years.”

 

The name of Floor Covering Media's Blog Articles are called Flooring Briefs.

 

 


 

 

Floor Covering Media, a business network serving the floor covering industry, provides readers timely, objective news and information about flooring topics.

 

 

Readers may conveneintly retrieve this timely, objective news and information at Floor Search.info, which is Floor Covering Media's public search engine.

 

Comments

No comments found

 

 

 

 

 

 

Introduction to Your Promotional Opportunities

Network Advertising

 

Sponsored Advertising

Hilly roadHilly roadHilly roadHilly roadHilly road
Ruggieri Flooring AdBishop Carpet NC AdCarpet Co NM AdFairway ID AdBrothers Flooring Ad
Diamond Floor Covering NC AdFlooring Design NC AdRunge ID AdWhites Flooring IN AdK N Carpet IN Ad
LamHammer Blog Ad3LamHammer Blog Ad4LamHammer Blog Ad5LamHammer Blog Ad2LamHammer Blog Ad1
BidTech B1 AdBidtech B2 adBid Tech B3 AdBid Tech B4 adBid Tech B5 ad
Partridges AdVogt Tile AdToms AdFlooring Concepts AdMason Ad
Revers Co AdThree Kings AdTroyer IN AdJerrico AdJackson Ad
QfloorsB1QfloorsB2QfloorsB3QfloorsB4QfloorsB5
 

Display Advertising

Hilly roadHilly roadHilly roadHilly roadHilly road
Barnegat Tile AdR and S Sales AdEd Whitcomb AdBierl Carpet 1 Ames IA AdBierl Spirit IA Ad
Home Furn IN AdThe Floor Store IN adCarpets Floors KY AdBierl Carpet 1 Carroll IA AdBierl C1 Urbandale Ad
MPMP2MPMPMP
Schattdecor d1 AdSchattdecor d2 AdSchattdecor d3 AdSchattdecor d4 adSchattdecor d5 Ad
Okayes Home AdVillage Decor IA Ad CBL MN AdHamernick MN AdAMARCO NJ Ad
The Flooring Solution NJ AdMain St Dec MN AdGrafs MN AdRays Carpet AdRug Shoppe NC Ad
Think BigThink BigThink BigThink BigThink Big

 

Most media planners aren't unlikely to consider Floor Covering Media for the schedule particularly with flooring clients. It is a natural fit or would seem so. 

 

 

During the course of the media plan, it isn't incredibly uncommon for the media planners to request specific pages. The Flooring Briefs page is one of the most commonly requested pages.

 

 

It's appealing to seasoned media planners. It's not a challenge to present even as an experiment to the client. There are a diversity of headlines over time each of which appeals to a broad range of interests within this niche industry. It is also affordably priced not to break the bank.

 

 



SkylineSkylineSkylineSkylineSkyline