Product Preview
Do-It-Yourself consumers find this portable tool handy for flooring projects.
Flooring contractors find that this tool pays for itself, after a few good jobs.
Contact Artillery's customer support team for a reasonably priced,
quote on a custom tool set or select from the starter sets below:
--- Dedicated Sets ---
Portal to the Artillery Tools, Shopping Cart
Ready to buy? Click on any the images below,which redirects
your browser to the shopping cart at Artillery Tools' Website.
Flooring Demolition Set
$312.00
Contractor Demolition Set
$378.00
Disaster Restoration Set
$549.00
Homeowner Demolition Set
$205.00
Professional Demolition Set
$229.00
Contractor Starter Demolition Set
$230.00
--- Individual Pry Bars ---
Standard 34" Bar:
Lightweight pry bar with extra prying force and additional reach.
Interchangable blade capability.
$80.00
Standard 24" Bar:
Is a lightweight pry bar with tapping capability.
Provides extra prying forces in tight spaces.
Interchangable blade capability.
$68.00
Mini 31" Bar:
Is the lightest-weight pry bar with extra prying force and additional reach.
Great for two-handed prying.
$71.00
Mini 21" Bar:
Is the lightest-weight pry bar with tapping capability.
Provides extra prying forces in tight spaces.
$57.00
46" Artillery® Bar:
Heavier bar with extra prying forces,
stands you up straighter when working on flooring and roofing.
Interchangable blade capability.
$106.00
Artillery® Rebar Bender:
Solves the problem of custom hand rebar bending on job sites.
Bends up to 5/8" rebar and works well to remove form ties.
Head comes attached to the Artillery Pry Bar System handles
that can be used with the rest of the Artillery Pry Bar System.
$113.00
31" Ultra Light Mini Bar:
The Mini Head on the Fiberglass Handle
creates the lightest pry bar at 3 lbs 3 oz
with plenty of length for leverage.
For siding and general overhead prying.
$69.00
Artillery® 40" Decking Bar:
Deck Fulcrum & Deck Blade with 12" Extension & 25" Steel handle.
Changed prying angle to an upright pushing or pulling motion.
Stradels trusses, joists and studs.
Lets you stand on decking while removing deck boards.
$136.00
--- Specialty Items ---
8" Blade:
Used for flooring, EFIS, scraping and roofing.
Spreads prying forces out over large area.
Will fit into contractor case.
$51.00
25" LB Fiberglass Handle:
The new fiberglass handle is over 50% lighter than our steel handle.
Weighs only 1-3/4 lbs.
Makes prying over head much easier on you.
There is nothing like this anywhere.
It can replace the original steel handle in any set.
Made in the USA.
Will fit into contractor case.
$36.50
Rebar Bender Head:
Individual head that attaches to
the Artillery Pry Bar handles
inside the Contractor and Professional case.
Solves the problem of custom hand rebar bending on job sites.
Head attaches to the Artillery Pry Bar System handles
which can create this configuration.
Does not fit in any current case.
$60.00
Ball Grip & Cap:
The Ball Grip screws onto the end of the steel handles
and provides a wide comfortable and universal grip on the end of the handle.
Specially designed for flooring removal comfort.
Comes with handle cap for when the Ball Grip is not needed.
Will fit into contractor case.
$26.00
Finished Nail & Staple Blade:
Removes staples from flooring, roofing, cabinetry.
Removes exposed nails of any kind.
Will fit into contractor case.
$45.00
Sheetrock/Deck Blade:
Stradles trusses, joists and studs to remove
decking, sheetrock, lathe & plaster etc.
Will fit into contractor case.
$49.00
Sheetrock/Deck Fulcrum:
Changes prying angle to up-right pushing or pulling motions.
Will fit into contractor case.
$33.00
13" Fiberglass Handle:
The 13" Fiberglass handle is lightweight and small enough to
allow access for demolition in extremely tight spaces.
The vinyl foam grip is designed for extra comfort and better grip.
The short handle allows all the head and bar configurations
to be short tools that allows access anywhere.
Will fit into contractor case.
Made in America.
$32.00
Toe Kick:
Attaches to Fulcrum Extender and facilitates use of "foot"
to kick the blade tip under the material being removed.
$12.00
Buried Nail Head (NEW):
This new item conveniently attaches to all handles
and allows the safe and speedy removal of embedded nails,
screws and anything else it can grip.
When combined with the 25" Handle and the 12" Extension Handle,
it gives you a 42" Cats Paw.
$33.25
Salvage Blade:
The Salvage Blade is very effective on siding, trim, glued/unglued particle board
and anything else that you want to salvage and reuse materials.
It has an operating angle that makes it more effective at getting under materials.
The blade shape has been designed for more versatility and side-cutting (the first of its kind).
It also has a new tapered profile that will penetrate materials with less effort and less damage.
Length: 9-1/4", Weight: 1-1/2 lb.
$54.00
